(832) 521-4347
Instant Quote

Frequently Asked Questions

Real Answers Before You Coat Your Floor

Most people start with the same thought: the floor looks bad, stays dirty, or is getting harder to work around. Then the real questions show up. What will it cost? Will it peel? How long will the space be out of use? What happens if the concrete is cracked? That is where the decision gets serious. This page answers the questions customers usually ask before hiring Epoxy Floors Houston.

Pricing and Estimates

How much does an Liquid Flooring Systems cost?

For most residential jobs, the size of the space will determine the price. The quality of the floor, excessive cracking, pitting, or other more extensive issues will affect the cost of your floor.

Mostly the variance has to do with experience. Companies that are established and doing this for a long time, you will not see much variance. Inexperienced companies will often lower prices to entice customers and generally will skip steps or use inferior products to keep costs down.

We would like to evaluate large commercial spaces through a site visit.

Concrete Prep and Condition

Why is surface prep so important?

The coating bonds to the concrete, not just sits on top of it. If the surface is too smooth, dirty, or weak, that bond can fail. Grinding the floor creates the texture needed for the coating to hold.

Prep also removes contaminants like oil, dust, or old material that can interfere with bonding. This step is what separates a floor that lasts from one that starts failing early.

Yes. Cracks, pits, and weak spots are part of the slab condition. If they are not addressed before coating, they can show through the finish or cause problems later.

Some cracks are minor and can be filled during prep. Others may require more attention depending on movement or depth. The slab is reviewed before installation so repairs match the condition of the floor.

Existing coatings or paint can prevent proper bonding. If the old material is weak or peeling, the new system will only be as strong as what is underneath it.

In most cases, the surface needs to be mechanically prepared so the coating bonds directly to the concrete. This removes weak layers and gives the new system a solid base.

Moisture and Failure

Why do some Liquid Flooring Systems peel?

Peeling happens when the coating loses its bond to the concrete. That usually comes from poor prep, leftover contaminants, or moisture pushing up through the slab.

The floor may look good right after installation, but once it is exposed to heat, traffic, or moisture, weak areas start to show. This is why the focus is always on the condition of the slab before the coating is applied.

Not every slab has moisture issues, but it is something that needs to be checked. In some cases, moisture vapor moves through the concrete and affects how coatings cure and bond.

If it is present, it needs to be addressed before installation. Ignoring it can lead to bubbling, lifting, or early failure.

No. A coating improves the surface, but it does not correct underlying structural issues. If the concrete is weak, damaged, or contaminated, those conditions need to be handled first.

The coating is only as reliable as the surface it is applied to.

Residential Garage Floors

What system is usually used for garage floors?

Most residential garages use a full broadcast flake system. It includes a base coat, a full layer of flakes, and a protective topcoat.

This setup gives consistent coverage, helps hide wear, and creates a surface that holds up under normal use like parking, storage, and everyday activity. It is one of the most practical systems for a garage that is used regularly.

A coating system is built differently than paint. Paint is a thin layer that sits on the surface and wears down faster. A coating system involves surface prep and multiple layers designed to bond to the concrete.

For a garage that sees daily use, the difference shows over time in how the floor holds up and how often it needs to be redone.

Most garage floors can be completed in about one day, depending on the condition of the slab and the system used. After installation, the floor needs time to cure.

Foot traffic usually comes first, followed by vehicles. The timing is explained before the job starts so you know when the space can be used again.

Commercial Floors

How is a commercial floor different from a garage floor?

Commercial floors deal with more than basic use. They may have forklifts, carts, equipment, cleaning routines, or constant foot traffic. The system has to match those conditions.

A coating that works in a garage may not hold up in a warehouse or kitchen. The floor is selected based on how the space operates, not just how it looks.

In many cases, yes. Commercial jobs are planned around access, workflow, and timing. Some projects are phased so sections can stay in use while others are being worked on.

The goal is to complete the work without creating unnecessary disruption to the business.

Common spaces include warehouses, kitchens, service bays, shops, facilities, and areas where the floor needs to handle traffic and be easier to maintain.

The main reason businesses choose coatings is to reduce ongoing floor problems and make the space easier to manage day to day.

Working With Epoxy Floors Houston

What happens during the estimate?

The floor is reviewed, including condition, damage, and surface wear. You will be asked how the space is used and what problems you are trying to solve.

Based on that, the right system is explained and a quote is provided that matches the actual work required.

Oil, grease, and long-term use can affect how the coating bonds. These areas need to be properly cleaned and prepped before installation. In some cases, deeper contamination requires more aggressive prep or repair. This is handled before coating so the system bonds to the concrete, not to a contaminated surface.

It depends on the starting condition of the slab. Minor repairs are usually blended into the surface during prep. Systems like full broadcast flake help hide variation and give a more uniform finish. Heavily damaged floors can be improved significantly, but they may not look like brand-new poured concrete.

Most failures are tied to issues with the slab, moisture, or conditions that were not visible at the surface. If something comes up, the floor is reviewed to determine the cause. From there, the next step is explained clearly, including whether it is a product issue or a service visit.

The process involves grinding, repairs, coating installation, and cure time. There will be noise and dust during prep, and the space will be out of use during installation and curing. Before the job starts, you are told what to expect, how long each step takes, and when the space can be used again.

- To Make An Appointment -

Ready to Talk About Your Floor?

If your floor is stained, dusty, cracked, hard to clean, or wearing down, the next step is to have it looked at.

Get A Quote